The type of Tacker Staples is very much, it is for our industrial production has brought great convenience. If there is no air Tacker Stapless, then a lot of work can not be completed. Obviously, a small air Tacker Staples can play a big role. Common spikes are many kinds, such as straight Tacker Stapless, steel row Tacker Stapless, mosquito Tacker Stapless and code Tacker Stapless and so on. These are a few common features of the gas is not the same. The following brief description of the four kinds of gas Tacker Stapless:
1, straight Tacker Staples (T-F type)
Similar to ordinary Tacker Stapless. The specific model is described as F plus length, for example, F30 refers to the length of 30mm straight Tacker Stapless.
2, steel row Tacker Stapless (ST type)
Similar to common Tacker Stapless. The specific model is described as ST plus length, for example ST30 refers to the length of 30mm steel row Tacker Stapless.
3, mosquito Tacker Stapless
Similar to ordinary Tacker Stapless, but more small, and no Tacker Staples head.
4, code Tacker Staples (N-J type)
Similar to the staple, the model is generally represented by the J prefix.
First, the correct use of lubricants
In order to maintain the best working performance of the tool, you must often use a small amount of lubricants, add a few drops of oil before each use,
It is best to use the company's lubricants, which is the key to the life of pneumatic tools. Do not use clean oil or any additives of oil, the use of improper lubricants will damage the internal parts of the tool.
Second, the use of air filters and oil and wood separator, the air damage to the water and dust is the main reason for wear Tacker Staples gun, it must be installed to reduce the wear and tear, the filter in the purification
The air must be kept clean and effective, the filter needs to be cleaned regularly, if the filter is dusty or blocked, then the pressure on the
Will reduce the impact of Tacker Staples performance.
Third, the use of cold instructions
When winter is less than zero, there must be measures to prevent icing of air compression pipes. It is recommended to use the company's winter lubricants and antifreeze.
Tacker Staples guns
Tacker Staples gun is the use of air pump (air compressor) to generate a strong pressure to drive the Tacker Staples in the Tacker Staples, the hammer to do hammer movement will row Tacker Staples clip in the row of Ding as the object or the row of Tacker Staples ejected out, pneumatic Tacker Staples gun Exhaust structure: sub-front exhaust and rear exhaust two-pin Tacker Staples gun works: Tacker Staples gun is formed by the gun body and clip clip combination. The gun body is composed of gun body, cylinder, balance valve, switch assembly, striker assembly (gun tongue), cushion and so on, the use of compressed air and atmospheric pressure, through the trigger switch so that the striker (piston) reciprocating in the cylinder ; Clip clip is composed of the tip of the gun, gun cover, fixed clip, clip and other accessories, through the compression spring or tension spring will be sent to the gun cover slot, when the striker out, the Tacker Staples out.